The Importance of Dry and Clean Air
Impurities and water in compressed air systems can damage equipment and cause enormous costs. This can be avoided with proper air drying and filtration.
Read more
Filters
Proper filtration is the only way to obtain oil-free air. TMC filters are designed to achieve the internationally recognized ISO8573-1 air quality standard.
Read more
Water Content in Saturated Air
The ambient air always contains water in form of vapor. The water amount is depending on the ambient air temperature. Click below to see the water content at specific dew points.
Read more

Refrigerant air dryers: pressure range 7-13 bar, dew point +3°C*

Model Flow rate Height Width Depth Weight
7 BAR/+3°C PDP
R35 35 568 368 394 30
RD90 92 510 483 579 42
RD110 111 525 336 763 46
RD150 (Available as watercooled) 154 525 336 763 51
RD180 182 525 336 763 55
RD250 (Available as watercooled) 246 718 440 915 73
RD310 (Available as watercooled) 308 718 440 915 86
RD370 372 760 520 966 86
RD490 492 760 544 966 95
RD600 615 801 644 1066 110
RD600-S (Available as watercooled) 600 1277 1081 1118 218
RD750 (Available as watercooled) 750 1277 1081 1118 295
RM1000 (Watercooled only) 1000 1942 1190 869 550
RM1200 (Watercooled only) 1200 1942 1190 869 580
RM1500 (Watercooled only) 1500 1942 1190 869 600
RM1800 (Watercooled only) 1800 1942 1190 869 600
RM2200 (Watercooled only) 2250 1942 1213 1369 890
RM2800 (Watercooled only) 2800 1942 1213 1369 980
RM3100 (Watercooled only) 3100 1942 1213 1369 1050
RM3400 (Watercooled only) 3450 1942 1213 1369 1180

Flow rate data given at 45°C inlet/ambient conditions and 7 bar working pressure. For other temperatures, please contact TMC.


Correction factors flow rate R/RD

Working pressure 3 4 5 6 7 8 9 10 11 12 13 14
Factor 0.72 0.85 0.92 0.96 1 1.04 1.1 1.13 1.15 1.18 1.21 1.24

Correction factors flow rate RM

Working pressure 4 5 6 7 8 9 10 11 12 13
Factor 0.85 0.91 0.95 1 1.03 1.09 1.11 1.14 1.17 1.20

High pressure refrigerant air dryers: pressure range 20-40 bar, dew point +3°C**

Model Flow rate Height Width Depth Weight
30 BAR/+3°C PDP
HP 0.17 28 660 501 521 39
HP 0.20 41 660 501 521 41
HP 0.25 63 660 501 521 43
HP 0.33 93 660 501 521 48
HP 0.50 137 954 651 498 114
HP 0.75 171 954 651 498 127
HP 1.0 (Available as watercooled) 291 1301 1026 1223 168
HP 1.5 (Available as watercooled) 422 1301 1026 1223 172
HP 2.0 (Available as watercooled) 621 1301 1026 1223 211

Flow rate data given at 45°C inlet/ambient conditions and 30 bar working pressure. For other temperatures, please contact TMC.


Correction factors flow rate HP

Working pressure 20 25 30 35 40
Factor 0.92 0.96 1 1.02 1.04

Adsorption air dryers: pressure range: 7-13 bar, dew point -40°c*

Model Flow rate Height Width Depth Weight
7 BAR/-40°C PDP
AD-4 4 796 465 180 13
AD-7 6.8 796 465 180 13
AD-12 12.3 796 465 180 17
AD-16 15.7 1041 487 180 19
AD-23 23.4 1041 487 180 30
AD-40 39.3 969 599 198 37
AD-54 54.2 1008 599 198 55
AD-85 84.6 1423 645 198 55
A-60 65 1950 750 750 165
A-100 99 1955 750 750 210
A-150 152 1970 750 750 260
A-180 180 1980 1150 750 423
A-250 270 1980 1150 750 465
A-400 405 1990 1150 750 556
A-550 585 1990 1150 750 662
A-700 720 2000 1150 750 826
A-900 900 1911 1622 1320 988
A-1200 1215 1936 1717 1420 1307
A-1500 1485 2130 1722 1470 1728
A-1800 1755 2098 1722 1520 2100
A-2200 2115 2161 1749 1720 2125
A-2500 2430 2260 1873 1770 2180
A-3400 3240 2246 1950 1920 2415
A-4800 4635 2440 2481 2140 4010
A-6600 6390 2709 2887 2280 4700
A-8700 8370 2568 2987 2470 5695

Flow rate data given at 45°C inlet/ambient conditions and 7 bar working pressure. For other temperatures, please contact TMC.


Correction factors flow rate AD

Working pressure 4 5 6 7 8 9 10 11 12 13 14 15 16
Factor 0.47 0.65 0.88 1 1.08 1.14 1.2 0.65 0.76 0.88 1 1.15 1.3

Correction factors flow rate A

Working pressure 5 6 7 8 9 10 11 12 13 14 15 16
Factor 0.75 0.88 1 1.06 1.12 1.18 1.23 1.28 1.33 1.37 1.42 1.46
*Flow rate given at pressure 7 bar, ambient temperature 45 °C and inlet temperature 45°C
** HP series flow rate given at pressure 30 bar.
Capacities and dimensions are subject to change without notice. Before installation, obtain correct dimensions from technical drawings.