TMC Air Dryers & Filters
When atmospheric air goes through a compressor, the air volume is reduced but the air still contains the same amount of impurities and water as the original air volume.
TMC offers complete compressed air systems including dryers and filters to achieve the highest air quality.
Filters for any Compressed Air Quality
Proper filtration is the only way to obtain oil-free air.
A compressor installed on board a ship will compress the ambient air, which normally contains various impurities and up to 1 mg/m3 of oil.
Due to the high oil content in the ambient air, proper filtration should always be installed downstream to ensure the quality of the air.
It’s a widespread belief that an oil-free compressor (a compressor with no oil in its internal system) produces oil-free air. This is not correct. The impurities from the ambient air will not disappear when the air goes through the oil-free compressor.
An oil-lubricated compressor with proper filtration can easily achieve oil-free air of the highest purity class under ISO 8573.1. An oil-free compressor also needs proper filtration to achieve this.
In air systems set up to achieve the highest air quality, oil-lubricated compressors, as supplied by TMC, have many advantages.
Economic benefits of an oil-lubricated compressor
To determine the total economy of an oil-free compressor versus an oil-lubricated compressor consider the following:
- Investment costs
Considerably lower for an oil-lubricated compressor.
- Overhaul intervals
Considerably longer for an oil-lubricated compressor.
Considerably simpler and easier for an oil-lubricated compressor.
The reliability of oil-lubricated TMC compressors is well established.
Reliability is particularly impressive for the high ambient temperatures in which an oil-free compressor suffers.
The TMC F-Series of compressed air filters provide the exact degree of filtration needed for your application:
The filters are designed to achieve the internationally recognized ISO8573-1 air quality standard.
The differential pressure indicator indicates optimum time for element change – maximizing your element investment while minimizing pressure drop.